English
Português-
- PBA Blow Molding Machine (Air Power)
- PBS Blow Molding Machine (Single Station)
- PBS Blow Molding Machine 305 Series (15-400ml)
- PBS Blow Molding Machine 405 Series (60-1000ml)
- PBS Blow Molding Machine 505 Series (150-2500ml)
- PBS Blow Molding Machine 605 Series (500-5000ml)
- PBS Blow Molding Machine 705 Series (1000-10000ml)
- PBS Blow Molding Machine 905 Series (5000-20000ml)
- PBSS Blow Molding Machine (Double Stations)
- PBSS Blow Molding Machine 605 Series (60-1000ml)
- PBSS Blow Molding Machine 705 Series (150-2500ml)
- PBSS Blow Molding Machine 905 Series (500-5000ml)
- PBSS Blow Molding Machine 1005 Series (1000-5000ml)
- 5 Gallon PC Blow Molding Machine
- PU Shoe-pads Blow Molding Machine
- 3 to 5 Layer Blow Molding Machine
- PBI Blow Molding Machine
- Blow Molding Machine Accessories
- New Products
5 Gallon PC Blow Molding Machine
Feature
Screw type first-in and first-out accumulation type die-head. Generally, PC material has higher fluidity and does not need die head. Therefore it's not easy to produce products with large handles or heavier products. To meet the special design requirements, PC products with capacity of 20 liters requires 40 ~45 seconds for product cycle time. The appearances of bottles can be adjusted per customer design requirements.
We have many years of experience, and the design for this series is complete. Unlike other people who do not have experience in PC material, and most of them have difficulties in optimizing bottle brightness and cycle time. We can offer our experience to customers with our PC peripheral equipment of bottle blow molding machines.
Specification
| Model No. | Unit | PBS-905I-PC |
| Main Screw Diameter | mm | 90 |
| Main Screw L/D ratio | L/D | 22/1 |
| Inverter motor | HP | 60 |
| Screw rotating speed | r.p.m | 56 |
| Number of heaters | Zone | 6 |
| Heating capacity | KW | 13 |
| Extruding capacity per hour | kg/hr | 130 |
| Extruding mouth outer diameter | mm | 180 |
| Mold center distance | mm | / |
| Reserves/shot size | liter | 5 |
| Open/close mold limitation | mm | 400~900 |
| Mold length | mm | 500 |
| Mold width | mm | 550 |
| Dry cycle per hour | Time/hr | 600 |
| Pump driven motor | HP | 40 |
| Clamping force | Ton | 17 |
| General parison control | Gallon | 5 |
| Oil tank capacity | Gallon | 190 |
| Pressure of air | HP | 10-12 |
| Air Consumption | mm | 7.5 |
| Product weight | g | 700 |
| Product capacity | Gallon | 5 |
| Total power consumption | Kw/hr | 75 |
| Machine dimension (L*W*H) | m | 5.07*3.00*4.03 |
Due to our commitment to ongoing technological progress, we reserve the right of technical alternatives without prior notice.
-
- PU Shoe-pads Blow Molding Machine Suitable for producing the full- thenar, half- thenar size air cushion shoe-pads, is adopted by famous international brand sports shoes ...
-
- 3 to 5 Layer Blow Molding Machine Entire machine functions and condition can be monitored and set on the control cabinet, such as temperature setting, hydraulic setting ...
-
- PBI Blow Molding Machine This model is specially designed with accumulator head configuration for producing PE barrels with capacity of 10 to 75 liters, such as chemical drums, petrol drum, toolbox, etc ...
-
- Blow Molding Machine Accessories We mainly provide PBS plastic blow molding machines, PBA plastic blow molding machines, PBSS plastic blow molding machines ...
